Gigabyte 1TB SATA3 2.5inch SSD

Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
ID: 982768 Product code: GP-GSTFS31100TNTD
In stock 15 units
Warranty: 3 years
73.07 €
Ready for dispatch
on Monday, 14.07.2025
starting from 0 €
Delivery options
  • Receiving goods at the Dateks office
    0.00 €
  • DPD Pickup Parcel Cabinet
    Within 1-2 working days
    0.00 €
  • Parcel terminal
    Within 1-2 working days
    0.00 €
  • Post Office
    Within 1-2 working days
    0.00 €
  • Omniva parcel machine
    Within 1-2 working days
    0.00 €
  • SmartPosti parcel terminal
    Within 1-2 working days
    0.00 €
  • Delivery throughout Latvia.
    Within 1-2 working days
    4.99 €
Main product parameters All parameters
  • Capacity: 1 TB
  • Type: SATA
  • Read speed (sequential): 550 MB/s
  • Write speed (sequential): 500 MB/s
  • Form factor: 2.5"
  • Interface: SATA III (6Gb/s)
Description

We offer to purchase a Gigabyte 2.5" format SSD drive with a 1 TB capacity.

The disk is equipped with the traditional SATA port. It uses SATA data and power cables.

This is a SATA type of disk. Even though this SSD disk operates with an older SATA III protocol, it is fully suitable for both everyday tasks and situations when it's important to reduce costs.

The read speed for this SSD drive reaches 550 MB/s. However, it's crucial to note - if the "fast" drives are not provided with adequate cooling, they may not be able to operate at the speed indicated by the manufacturer.

The writing speed for this SSD disk reaches 500 MB/s. Without a suitable cooling mechanism, "fast" disks may not be able to achieve the performance indicators promised by the manufacturer.

To ensure memory chips maintain a low temperature and assure constant performance over long periods of use, the disk equipment is equipped with a cooler or a radiator. However, even if you purchase a "fast" SSD without a built-in radiator, it's not critical - almost all motherboards (99%) already have an integrated M.2 slot cooler.

This is an SSD disk in the 2.5" format.

The SSD drive has a SATA III (6Gb/s) interface. If it is inserted into an older interface slot, the potential speed of the drive will not be fully utilized, as the older interface will not provide sufficient data transfer bandwidth.

Basic information
Capacity 1 TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type : SATA
Read speed (sequential) 550 MB/s

Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.

If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.

Write speed (sequential) 500 MB/s

The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.

Functionality
Radiators : Ir
Lighting : Nav
Ports and equipment
Form factor 2.5"

Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at Dateks.lv section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.

1.8" discs are intended for the ultra-compact class portable computers.

PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.

Interface : SATA III (6Gb/s)
Interface SATA

SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.

The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.

Specifikācija
Memory type : TLC (Triple-Level Cell)
Random Read IOPS : Not specified
Random Write IOPS : Not specified
Endurance (TBW) : 600 TB
More detailed specification
Additional information in manufacturers website Gigabyte 1TB SATA3 2.5inch SSD
Brand - GIGABYTE
BrandPartCode - GP-GSTFS31100TNTD
Category - Internal Solid State Drives
Category Code - SSM
Category_1 - Hard Drives and Pendrives
Category_2 - Internal Hard Drives - SATA - 2.5 inch
Code - GP-GSTFS31100TNTD
Description - Form Factor: 2.5-inch internal SSD - Interface: SATA 6.0Gb/s - Total Capacity: 1TB* - Sequential Read speed : up to 550 MB/s - Sequential Write speed : up to 500 MB/s - TRIM & S.M.A.R.T supported
Design > SSD form factor - 2.5-inch
Dimensions - 69.85 x 7 x 100 mm
Drive thickness - 7mm
EAN - 4719331804565
EAN_code - 4719331804565
Features - Interface - Serial ATA
Features - Read speed - 550 MB/s
Features - SSD capacity - 1 TB
Features - SSD form factor - 2.5"
Features - Write speed - 500 MB/s
Form Factor - 2,5"
Full Description Line - 1TB|SATA 3.0|Write speed 500 MBytes/sec|Read speed 550 MBytes/sec|Form Factor 2,5"|Drive thickness 7mm|TBW 600 TB|MTBF 2000000 hours
GTIN - 0889523015575
GTIN - 889523015575
GTIN - 4719331804565
Link - https://www.gigabyte.com/Solid-State-Drive/GIGABYTE-SSD-1TB#kf
Logistics data - Harmonized System (HS) code - 84717070
LongDesc - Performance . StabilityGIGABYTE Solid State DriveSolid State Drive VS. Traditional Hard DriveSSD 2.5"Shock resistant up to 1500g/0.5msController NAND Flash MemoryHDD 3.5"Shock resistant up to 350g/2msSSD Tool BoxThe newly updated SSD Tool Box is an application that helps users monitor SSD Status, provides general information such as model name, FW version, health condition, drive optimization and also detects sensor temperature. Moreover, users can clear all the data with the Secure Erase function. You can download the SSD Tool Box from the Support.
LongProductName - 1 TB, 2.5", NAND Flash, 550/500 MB/s
LongSummaryDescription - GIGABYTE GP-GSTFS31100TNTD. SSD capacity: 1 TB, SSD form factor: 2.5", Read speed: 550 MB/s, Write speed: 500 MB/s
Manufacturer - GigaByte
Manufacturer_code - GP-GSTFS31100TNTD
MTBF - 2e+006 hours
Name - GIGABYTE SSD 1TB (black, SATA 6 Gb/s, 2.5)
Name - Gigabyte | GP-GSTFS31100TNTD | 1000 GB | SSD form factor 2.5-inch | Solid-state drive interface SATA | Read speed 550 MB/s | Write speed 500 MB/s
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 69.85 mm
Package features > Gross height (mm) - 100.00 mm
Package features > Gross weight - 0.11 kg
Package features > Gross width (mm) - 7.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 8850 pc(s)
Package features > Paper/Pasteboard - 43.00 g
Package features > Tare weight (kg) - 0.04 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEE classification - CL109:6:2017-04-01
Package features > WEEE tax - Yes
Performance > Read speed - 550 MB/s
Performance > Solid-state drive capacity - 1000 GB
Performance > Solid-state drive interface - SATA
Performance > Write speed - 500 MB/s
Producer product name - GP-GSTFS31100TNTD
ProductName - GP-GSTFS31100TNTD
Product Net Weight - 0.07 kg
Read speed - 550 MBytes/sec
SATA 3.0 Interface - Yes
Shipping Box Depth Shipping/Package Box Dimensions - 15.5 cm
Shipping Box Height Shipping/Package Box Dimensions - 12.5 cm
Shipping Box Weight Shipping/Package Box Dimensions - 0.08 kg
Shipping Box Width Shipping/Package Box Dimensions - 2 cm
ShortSummaryDescription - GIGABYTE GP-GSTFS31100TNTD, 1 TB, 2.5", 550 MB/s
SSD Capacity - 1TB
TBW - 600 TB
Technical details > Net weight - 0.07 kg
Technical details > Producer - Gigabyte
Title - GIGABYTE GP-GSTFS31100TNTD internal solid state drive 1 TB 2.5" Serial ATA
Unit Box Height - 0.125
Unit Box Length - 0.155
Unit Box Width - 0.02
Unit Calculated Volume - 0.0003875 cubm
Unit Calculated Weight - 0.08 kg
Units per Shipping Box - 1
URL - https://www.gigabyte.com/Solid-State-Drive/GIGABYTE-SSD-1TB#kf
Vendor Homepage - www.gigabyte.com/Solid-State-Drive/GIGABYTE-SSD-1TB#kf
Warranty - 36
Warranty - 36 month(s)
Warranty - 36L months
WarrantyInfo - 3 Years Limited Warranty
Weight - 0,08
Write speed - 500 MBytes/sec
73.07 €
Gigabyte 1TB SATA3 2.5inch SSD
    Tālr. 67275758 gsm 26117175 (p.o.t.c.p. 9:00-18:00)
    Intel technology provider Platinum 2020
    All categories