Transcend SSD330, 128GB, IDE
- Delivery to Smartpost free of charge: 29.11.2024
- Delivery to Omniva parcel machine free of charge: 29.11.2024
- Piegāde uz DPD Pickup Paku Skapi free of charge: 29.11.2024
- Delivery to Latvian post office, parcel locker or Circle K free of charge: 29.11.2024
- Delivery to address in Riga 3.99 €: 29.11.2024
- Delivery to address in Latvia 6.99 €: 29.11.2024
- Delivery to Dateks.lv parcel drop-off point at 9 Zemitāna Street: on Wednesday, 27.11.2024 after 15:00
- Capacity: 128 GB
- Read speed (sequential): 120 MB/s
- Write speed (sequential): 70 MB/s
- Form factor: 2.5"
- Interface: IDE
This Transcend brand SSD has a 128 GB capacity and a 2.5" format.
120 MB/s – this is the data reading speed that this SSD disk is capable of reaching. However, we must remember one crucial nuance - "fast" disks may not show the performance promised by the manufacturer if adequate cooling is not provided.
The writing speed for this SSD disk reaches 70 MB/s. Without a suitable cooling mechanism, "fast" disks may not be able to achieve the performance indicators promised by the manufacturer.
This is an SSD disk in the 2.5" format.
The SSD drive has a IDE interface. If it is inserted into an older interface slot, the potential speed of the drive will not be fully utilized, as the older interface will not provide sufficient data transfer bandwidth.
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at Dateks.lv section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
ARTIKEL2 - IDE 44PIN 2.5IN MLC
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD
EANCode - 0760557824855
EAN_code - 0760557824855
Gewicht - 0.09
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
HERSTELLER - TRANSCEND
HSTNUMMER - TS128GPSD330
Manufacturer - Transcend
Manufacturer_code - TS128GPSD330
Name - Transcend 128GB GPSD330
Stck_Kart - 9998
Stck_Pal - 0
Storno - N
Technical_details - Transcend’s 2.5” PATA SSDs support high-speed UDMA Mode 6, and offer installation flexibility for desktops, laptops or portable devices built around the 2.5" PATA (IDE) storage device standard. When replacing a traditional 2.5" IDE HDD with an SSD to enhance overall system performance, lndustrial-grade 2.5” PATA SSDs are the optimal choice. - Fully compatible with the PATA interface standard
- Advanced Global Wear-Leveling and Block Management ensure long-term reliability
- Advanced Power Shield prevents data loss in the event of a sudden power outage
- Three-year Limited Warranty** Model Name TS128GPSD330 Series PSD330 Design 2,5 inch Capacity 128 GB Interface internal 44-Pin Ultra DMA/133 Maximum Data Transfer Rate Read 119 MB/s Write 67 MB/s Power Consumption Read / Write 0.5 watt(s) Idle 0.04 watt(s) MTBF 1.000.000 hour(s) Product dimensions 100 x 7.4 x 70 mm Weight 55 grams
Weight - 0,12