Lexar NM790, 2TB, M.2 Gen4 x4, with Heatsink
- Delivery to Omniva parcel machine free of charge: 08.01.2025
- Piegāde uz DPD Pickup Paku Skapi free of charge: 08.01.2025
- Delivery to Latvian post office, parcel locker or Circle K free of charge: 08.01.2025
- Delivery to address in Riga 3.99 €: 08.01.2025
- Delivery to address in Latvia 6.99 €: 08.01.2025
- Delivery to Dateks.lv parcel drop-off point at 9 Zemitāna Street: 06.01.2025 after 15:00
- Capacity: 2 TB
- Type: NVMe
- Read speed (sequential): 7400 MB/s
- Write speed (sequential): 6500 MB/s
- Form factor: M.2 80mm (2280)
- Interface: PCIe 4.0 x4
This Lexar brand SSD has a 2 TB capacity and a M.2 80mm (2280) format.
This disc uses the latest generation compact M.2 port.
This SSD drive uses the latest NVME standard with PCIe interface, which allows simultaneous data transmission across multiple data lines. Thanks to this technology, the drive is ideally suited for those who work with large files, play computer games or deal with video editing.
This SSD disk read speed (Sequential read speed) is 7400 MB/s. Keep in mind that "fast" disks without a proper cooling solution may not reach the speeds indicated by the manufacturer.
The write speed (Sequential write speed) of this SSD is 6500 MB/s. However, if adequate cooling is not provided, "fast" drives may not achieve the speeds guaranteed by the manufacturer.
This SSD drive is equipped with a heatsink or a cooler, which helps to keep the memory chips cool and ensure stable writing and reading speed during prolonged operation. Even if a "fast" drive without a heatsink is chosen, in 99% of cases the system board will be equipped with an M.2 slot cooler.
This is an SSD disk in the M.2 80mm (2280) format.
This SSD drive interface is PCIe 4.0 x4. If you insert this drive into an older interface slot, the speed of the drive will decrease, as the drive will not have sufficient data transfer speed (Bandwidth).
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at Dateks.lv section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
BrandCode - LEXAR
Category - Root/Electronics/PC parts/Hard drives
Category Code - SSU
Code - LNM790X002T-RN9NG
Color - Not applicable
Depth - 80 mm
Depth (mm) - 80 mm
Description -
Description - NM790 with Heatsink M.2 2280 PCIe Gen 4×4 NVMe SSD - High-speed Performance - PCIe Gen4x4 Interface - NVMe 2.0 Technology Standard - Integrated heatsink
Design > SSD form factor - M.2 2280
Device Location - Plug-in Module
dimension depth - 10 mm
dimension height - 100 mm
Dimensions - 80 x 24 x 9.7 mm
dimension weight - 93 g
dimension width - 120 mm
Disk type - SSD
Drive thickness - 9.7mm
Drive type - Internal
EAN - 843367131259
ean - 843367131259
EAN Code - 843367131259
Eans - 843367131259
Flash Memory Cell Technology - Single-Level Cell
Form Factor - M.2
Form Factor - M.2 22x80mm
Form factor (width) - M.2 2280
Full Description Line - SSD series NM790|2TB|Form Factor M.2|PCIe Gen4|NVMe|Write speed 6500 MBytes/sec|Read speed 7400 MBytes/sec|Drive thickness 9.7mm|TBW 1500 TB|MTBF 1500000 hours
General parameters - manufacturer - Lexar
GrossWeight - 0.1500
Group - IT > IT ACCESSORIES > PC COMPONENTS > INTERNAL DRIVES > SSD
guarantee - 60
guarantee_type - normal
HDD capacity - 2 TB
HDD interface - PCI-Express
Height - 0.2400
Height - 9.7 mm
Height (mm) - 9.7 mm
Image - https://content.it4profit.com/pimg/s/resize/900x900x900x900/231111150014040474.jpg
Included Accessories - Īsa lietotāja rokasgrāmata
Length - 0.0800
Link - https://www.lexar.com/product/nm790-with-heatsink-m-2-2280-pcie-gen-4x4-nvme-ssd/
Maximum Non-Operating Ambient Temperature - 85 °C
Maximum Operating Ambient Temperature - 70 °C
Maximum Sequential Read Rate - 7400 MB/s
Maximum Sequential Write Rate - 6500 MB/s
Mean Time Between Failures - 1500000 hr
Memory / storage - form factor - M.2
Memory / storage - storage type - SSD
Memory / storage - transfer rate - 7400
Memory Technology - NAND Flash
Minimum Non-Operating Ambient Temperature - -40 °C
Minimum Operating Ambient Temperature - 0 °C
Model - LNM790X002T-RN9NG
Model - NM790 radiator
MTBF - 1.5e+006 hours
Name - Lexar NM790 Pci-e NVMe 2TB z radiatorem
Name - Lexar | SSD | NM790 with Heatsink | 2000 GB | SSD form factor M.2 2280 | Solid-state drive interface PCIe Gen4x4 | Read speed 7400 MB/s | Write speed 6500 MB/s
name - SSD drive NM790 2TB radiator PCIeGen4x4 7400/6500MB/s
Name EN - SSD Lexar NM790 2TB Heatsink M.2
Name ET - SSD Lexar NM790 2TB Heatsink M.2
NameInWeb EN - Lexar NM790, 2 TB, Heatsink, M.2 - SSD
NameInWeb ET - Lexar NM790, 2 TB, Heatsink, M.2 - SSD
NameInWeb LV - Lexar NM790, 2 TB, Heatsink, M.2 - SSD cietais disks
Name LV - SSD Lexar NM790 2TB Heatsink M.2
NetWeight - 0.1000
Nominal Weight - 48.6 g
NVMe - Yes
Other features -
Package features > Embeeded battery - No
Package features > Gross depth (mm) - 80.00 mm
Package features > Gross height (mm) - 9.70 mm
Package features > Gross width (mm) - 24.00 mm
Package features > Packing quantity - 1.00 pc(s)
Package features > Palette Qty - 6757 pc(s)
Package features > Paper/Pasteboard - 8.00 g
Package features > Plastic (No PET) - 2.00 g
Package features > Tare weight (kg) - 0.10 kg
Package features > Volume (m3) - 0.00 m³
Package features > WEE classification - CL109:6:2017-04-01
Package features > WEEE tax - Yes
Package Type - Retail
Packs in Box - 1
Pack Weight Brutto (kg) - 0.05 kg
Pack Weight Netto (kg) - 0.05 kg
PCIe Gen4 Interface - Yes
Performance > Read speed - 7400 MB/s
Performance > Solid-state drive capacity - 2000 GB
Performance > Solid-state drive interface - PCIe Gen4x4
Performance > Write speed - 6500 MB/s
Pieces in pack - 1
producer - Lexar
Producer - Lexar
ProducerCode - LNM790X002T-RN9NG
Producer product family - SSD
Producer product name - NM790 with Heatsink
ProductCard - https://content.it4profit.com/itshop/itemcard_cs.jsp?ITEM=231002063951073362&THEME=asbis&LANG=lv
ProductCategory - SSD
ProductCode - LNM790X002T-RN9NG
ProductDescription - Lexar 2TB High Speed PCIe Gen 4X4 M.2 NVMe, up to 7400 MB/s read and 6500 MB/s write with Heatsink, EAN: 843367131259
ProductionCountry - CN
ProductType - SSD Client
Reading speed - 7400 MB/s
Read speed - 7400 MBytes/sec
Retail Packaging Net Weight Carton - 0.05 kg
Retail Packaging Net Weight Plastic - 0.05 kg
SalesUnitOfMeasureCode - tk
Shipping Box Depth Shipping/Package Box Dimensions - 18.5 cm
Shipping Box Height Shipping/Package Box Dimensions - 17 cm
Shipping box quantity - 10
Shipping Box Weight Shipping/Package Box Dimensions - 1.048 kg
Shipping Box Width Shipping/Package Box Dimensions - 12.5 cm
Shock Tolerance Operating - 1500G @ 0.5ms
ShortDescription -
ShortDescription EN - Lexar NM790 with Heatsink M.2 2280 PCIe Gen 4×4 NVMe SSD is a fast and reliable storage solution that is well-suited for demanding users and computer enthusiasts. This SSD features PCIe Gen 4×4 connectivity, which ensures high read and write speeds, making it an excellent choice for tasks such as video editing, gaming, and resource-intensive applications. Additionally, it comes with a heatsink radiator that helps maintain the long-term stability of the SSD, making it suitable for professional users who require fast and dependable data storage.
ShortDescription ET - Lexar NM790 with Heatsink M.2 2280 PCIe Gen 4×4 NVMe SSD on kiire ja usaldusväärne andmekandja, mis sobib suurepäraselt nõudlikele kasutajatele ja arvutientusiastidele. Selle SSD-l on PCIe Gen 4×4 ühenduvus, mis tagab suure lugemis- ja kirjutamiskiiruse, muutes selle ideaalseks valikuks videomontaaži, mängude ja ressursinõudlike rakenduste jaoks. Lisaks on sellel jahutusradiaator, mis aitab säilitada SSD pikaajalist stabiilsust, muutes selle sobivaks ka professionaalsetele kasutajatele, kes vajavad kiiret ja usaldusväärset andmesalvestusvõimalust.
Solid State Drive Features - NVMe SupportHeatsink
SSD Capacity - 2TB
SSD series - NM790
Storage Capacity - 2 TB
Storage device - HDD / Flash memory capacity - 2000
Storage device - type - SSD
Supports Data Channel - PCIe NVMe 4.0 x4
TariffNo - 84717098
TBW - 1500 TB
TBW - 1500 TB
Technical details > Gross weight - 0.15 kg
Technical details > Net weight - 0.05 kg
Technical details > Producer - Lexar
Technical details > Warranty - 36 month(s)
Total Bytes Written (TBW) - 1500 TB
Unit Box Height - 0.105
Unit Box Length - 0.14
Unit Box Width - 0.015
Unit Brutto Volume - 0.0003931 cubm
Unit Gross Weight - 0.1048 kg
Unit Net Weight - 0.048 kg
UnitOfMeasureCode - tk
UnitsPerPackage - 1
Vendor - LEXAR
Vendor Homepage - www.lexar.com/product/nm790-with-heatsink-m-2-2280-pcie-gen-4x4-nvme-ssd/
vendpn - LNM790X002T-RN9NG
Vibration Tolerance Operating - 20G @10-2000Hz
Volume - 0.00019200
Warranty - 36
Warranty - 60 months
Warranty Products Returnable - Yes
Warranty Term (month) - 60 mēneši
Warranty validation Criteria - Serial Number
Weight - 48.6 g
Width - 0.0100
Width - 24 mm
Width (mm) - 24 mm
Write speed - 6500 MBytes/sec
Writing speed - 6500 MB/s