Apraksts - KNX system integration module The INT-KNX-2 is a module in the form of expander, which combines the functionality of advanced alarm system based on INTEGRA control panel with the KNX system. Combining the INTEGRA system flexibility with a wide range of KNX devices extends the capabilities of both systems. This solution is also associated with cost savings. The capability of using the alarm system keypads to control the KNX devices eliminates the need to purchase expensive KNX control panels. The INT-KNX-2 module makes it possible to control the actuators by using the panel, while there is also the capability of reverse transfer of information from the KNX system to the control panel. The BTM module is not required for installation, because the INT-KNX-2 is equipped with KNX socket for direct connection to the KNX bus. The module configuration settings are made in the computer with DLOADX program installed. The module can be mounted either inside the enclosure with the control panel or outside of it in the OPU-1 A universal enclosure.
Garantija - 36 mēneši
Izmēri - 80 x 57 mm
Kategorijas kods - ADM
Piegādes kastes augstums Piegādes/iepakojuma kastes izmēri - 8.5 cm
Piegādes kastes daudzums - 1
Piegādes kastes dziļums Piegādes/iepakojuma kastes izmēri - 16.5 cm
Piegādes kastes platums Piegādes/iepakojuma kastes izmēri - 4.5 cm
Piegādes kastes svars Piegādes/iepakojuma kastes izmēri - 0.074 kg
Pilna apraksta līnija - Dimensions 80 x 57 mm|Unit Brutto Volume 0.0006311 cubm
Pārdevēja mājas lapa - https://www.satel.pl/en/produktid/932
Vienība Neto svars - 0.032 kg
Vienības bruto svars - 0.074 kg
Vienības kastes augstums - 0.085
Vienības kastes garums - 0.165
Vienības kastes platums - 0.045
Vienība Slikts tilpums - 0,0006311 kubikmetru
Description - KNX system integration module The INT-KNX-2 is a module in the form of expander, which combines the functionality of advanced alarm system based on INTEGRA control panel with the KNX system. Combining the INTEGRA system flexibility with a wide range of KNX devices extends the capabilities of both systems. This solution is also associated with cost savings. The capability of using the alarm system keypads to control the KNX devices eliminates the need to purchase expensive KNX control panels. The INT-KNX-2 module makes it possible to control the actuators by using the panel, while there is also the capability of reverse transfer of information from the KNX system to the control panel. The BTM module is not required for installation, because the INT-KNX-2 is equipped with KNX socket for direct connection to the KNX bus. The module configuration settings are made in the computer with DLOADX program installed. The module can be mounted either inside the enclosure with the control panel or outside of it in the OPU-1 A universal enclosure.
Warranty - 36 months
Dimensions - 80 x 57 mm
Category Code - ADM
Shipping Box Height Shipping/Package Box Dimensions - 8.5 cm
Shipping box quantity - 1
Shipping Box Depth Shipping/Package Box Dimensions - 16.5 cm
Shipping Box Width Shipping/Package Box Dimensions - 4.5 cm
Shipping Box Weight Shipping/Package Box Dimensions - 0.074 kg
Full Description Line - Dimensions 80 x 57 mm|Unit Brutto Volume 0.0006311 cubm
Vendor Homepage - https://www.satel.pl/en/produktid/932
Unit Net Weight - 0.032 kg
Unit Gross Weight - 0.074 kg
Unit Box Height - 0.085
Unit Box Length - 0.165
Unit Box Width - 0.045
Unit Brutto Volume - 0.0006311 cubm
